CLASSICS

Classic Products

CLASSICS

These sound systems are acoustic all-rounders. Passive and 'Self Powered' variants with integrated amplifier electronics. Durable, flexible and always reliable. Proven solutions for the highest requirements.

SP SERIES

K&F SP SERIES

Powerful drive

With this high-quality self-powered loudspeaker system, the best possible sound characteristics and the ideally tuned amplification power are already integrated. This product series is based on selected models from the passive K&F CA and Line series, which are equipped with state-of-the-art, innovative driver and power amplifier technology. The implemented active electronics are run by the system-specific controller functions and include one to two highly efficient digital and fanless 1 kW class D power amplifiers. The complete electronic system weighs only 2.5 kg (or 4.5 kg). Remarkably powerful!

Completely compatible

All full-range systems from the SP series also have a passive crossover, in addition to the controller and power amplification electronics functions, which ideally complement the known advantages of the K&F passive technology (all-pass filters, safety switches). In this way, the full-range systems and subwoofers of the SP series are completely acoustically compatible with the corresponding passive models from the CA and Line series. Can be flexibly combined at any time!


Conceivably simple

All active speakers are ready to be used immediately, since the full-range systems of the SP Series reproduce the complete frequency range. If necessary, SP subwoofers can provide additional support to the bass playback. An optional high-pass filter on the SP subwoofer then determines the ideal crossover frequency. All systems in the SP Series can be combined with one another using the integrated phase alignment. Easy going!

 

Product overview

CA 1001 – SP: 1 x 10″/1 x 1″ 85° x 55° (H x V)
CA 1215-6 – SP: 1 x 12″/1 x 1.5″ 65° x 50° (H x V)
CA 1215-9 – SP: 1 x 12″/1 x 1.5″ 90° x 50° (H x V)
CA 1515-6 – SP: 1 x 15″/1 x 1.5″ 65° x 50° (H x V)
CA 1515-9 – SP: 1 x 15″/1 x 1.5″ 90° x 50° (H x V)
Line 212-6 – SP: 2 x 12″/1 x 1.5″ 65° x 50° (H x V)
Line 212-9 – SP: 2 x 12″/1 x 1.5″ 90° x 50° (H x V)
SW 112 – SP: 1 x 12″ Omni
SWi 112 – SP: 1 x 12″ Omni
SW 115E – SP: 1 x 15″ Omni
SWi 115E – SP: 1 x 15″ Omni
SW 118E – SP: 1 x 18″ Omni
SWi 118E – SP: 1 x 18″ Omni
SW 215E – SP: 2 x 15″ Omni

PROJECTS

 

K&F SW 112 - SP

PRODUCT IS DISCONTINUED

OVERVIEW

  • Compact 1 x 12″ subwoofer with integrated driver and amplifier technology
  • Bass reflex enclosure in direct radiation design with exponential tunnel geometry
  • Mobile version
  • Max. SPL 128 dB (peak/1 m/half space)

TECHNICAL DATA

Design
Bass reflex system with exponential tunnel geometry, integrated driver and amplifier technology
lower cut-off frequency -10 dB
35 Hz (FILTERS 'ON')
Frequency range ±3 dB
41 Hz – 350 Hz (FILTERS 'OFF')
40 Hz – 120 Hz (FILTERS 'ON')
Max SPL
122 dB (peak/1 m/free field, equivalent 128 dB half space)
Components
12″ long excursion chassis, 100 mm voice coil with internal and external ventilation
Input connectors
Pin 1 = ground
Pin 2 = + signal
Pin 3 = - signal
LINE IN: XLR 3 pin female
LINE OUT: XLR 3 pin male, parallel with LINE IN
Enclosure
15 mm frame reinforced multiplex plywood, impact proof black structured paint (PU), ball proof steel grille with exchangeable front foam, 1 ergonomic handle, K&M mounting plate M20 for distance rod, 4 recessed, non-abrasive plastic sliders, stacking grooves
Dimensions (W x H x D)
470 x 375 x 520 mm
Weight
29.5 kg
Colour
RAL 9005 (black)
RAL Special Colour