Loudspeakers

Loudspeaker Products

LOUDSPEAKER

The perfect loudspeaker series for elegant, architectural room integration and for mobile use. Sophisticatedly developed with all-round convincing sound characteristics, even in acoustically difficult environments.

SEQUENZA 10

K&F SEQUENZA 10

Details that make a difference

The line array system, K&F SEQUENZA 10, proves convincing not only in its sound, but also in its handling. The fast and safe ‘Snap&Fly’ rigging system saves time and personnel without cutting corners on safety. All angle adjustments of the 3-point rigging system are pre-selected on the ground. When lifting, the units lock automatically and the line array is immediately ready for use. And all that with compact dimensions and a low weight. Sounds too good to be true? Check it out!

Directed power

An array of up to four elements generate a maximum sound pressure of up to 150 dB. Towards the stage, however, the system is extremely quiet. The K&F SEQUENZA 10 B subwoofer also blasts the powerful energy forward in a cardioid array and the rearward low-frequency part is eliminated. This generates a clearer and more distinct sound. On stage, however, it is much quieter and disturbing emissions in the surroundings are absent. More sound – less noise!

Patented Waveformer

The proven K&F patent is called ‘FLC’, which optimises the frequency distribution of both 10” chassis units. In the SEQUENZA 10 N/W line array modules, another innovative technology is used with the patented Waveformer with three 1” high-frequency drivers, which produces a plane wave front of up to over 16 kHz. With the unique tweeter resolution and the long throw, the system is impressive during every use. Or, in the words of the renowned trade journal ‘Production Partner’: “Thanks to the K&F SEQUENZA 10’s all-around perfected design, the system delivers a performance that can, without exaggerating, be considered as the cutting edge of feasibility in today’s state of technology.” In a nutshell!

Product overview

SEQUENZA 10 N: 2 x 10″/3 x 1″ 77° x 7° (H x V)
SEQUENZA 10 W: 2 x 10″/3 x 1″ 100° x 7° (H x V)
SEQUENZA 10 B: 2 x 15″ Omni

PROJECTS

 

K&F SEQUENZA 10 ACCESSORIES

OVERVIEW

SEQUENZA 10 Flying Frame
14 Quick Release Pins
For rigging of up to 24 SEQUENZA 10 N/W or for ground stacks (with optional Groundstack Kit) of up to 7 SEQUENZA 10 N/W
Colour: black
K&F Rotation Clamp 450 with 50 mm Bracket (HC823)
Load capacity max. 450 kg, use for Flying Frame K&F VIDA L (not in combination with VIDA L Flying Bracket), K&F SEQUENZA 5 and K&F SEQUENZA 10
K&F Rotation Clamp 450 with 60 mm Bracket (HC823)
Load capacity max. 450 kg, use for Flying Frame K&F VIDA L (not in combination with VIDA L Flying Bracket), K&F SEQUENZA 5 and K&F SEQUENZA 10
SEQUENZA 10 Groundstack Kit
3 heavy-duty swivel feet, including 6 Quick Release Pins Optional feet for groundstacking SEQUENZA 10 Flying Frame
Colour: black
Flightcase SEQUENZA 10 Flying Frame (2)
Flightcase for 2 SEQUENZA 10 Flying Frames and a single box chain shortener
Colour: black
Rain Protection SEQUENZA 10 Flying Frame
protects the rear mounted 'Snap&Fly' flying mechanics and cabelling from rain while in use
Colour: black
ProRental NL8 - Prof. Speaker-Cable NLT-840
High-grade cable with 8 conductors and 4 mm² cross-section, water-proof metal connectors Neutrik® NLT8FXAvailable length: 10m, 15m, 25m
SEQUENZA 10 Speaker Split Adapter
Split adapter, weather proof, 1 x Neutrik® NLT8MP 8-pin metal connector into 2 x Neutrik® NLT4FX 4-pin metal connector, high-grade cable with 4 conductors and 2.5 mm² cross-section
BOB
Break Out Box for clearly laid out signal distribution for K&F speaker systems, 2 Neutrik ® NLT8MP 8-pin metzal sockets into 4 Neutrik ® NLT4MP 4-pin metal sockets, 3 x M8 eyebolt for vertical and horizontal suspension (i.e. on flying frame)
Colour: black
Speaker-Patch-Cable NLT-425, 0,5 m
50 cm patch cable for the connection of SEQUENZA 5/10 (N/W) elements, high-grade cable with 4 conductors and 2.5 mm² cross-section, water-proof metal connectors Neutrik® NLT4FX
Speaker-Patch-Cable NLT-425, 1,7 m
170 cm patch cable for the connection of SEQUENZA (5/10) B elements, high-grade cable with 4 conductors an 2,5 mm² cross-section, water proof metal connector Neutrik ® NLT4FX
Rain Protection SEQUENZA 10 N/W
protects the rear mounted 'Snap&Fly' flying mechanics and cabelling from rain while in use
Colour: black
Connector Panel CP 4
19", 1 RU for composition of the K&F system rack containing K&F digital systemcontroller CD 44 and system power amplifier Lab.gruppen FP 10000Q
4 XLR audio frequency link outputs on front and 1 Speakon® 8-pole output (NL8MPR) for grouping of all 4 amplifier channels
Colour: red
Protective Cover SEQUENZA 10 N/W
protects the speaker enclosures during transport
Colour: black
Protective Cover SEQUENZA 10 B
protects the speaker enclosures during transport
Colour: black
Transport Cover SEQUENZA 10 N/W
with 100 mm transport castors, 2 handles, quick lock, stackable
Colour: RAL 9005 (black)
Transport Cover SEQUENZA 10 B
with 100 mm transport castors, stackable
Colour: RAL 9005 (black)
Transport Cart for 4 elements SEQUENZA 10 N/W
for optimal handling when setting up. The angles of the individual elements can be maintained. Optional lid for stacking during transport.
Farbe: RAL 9005 (black)

DOWNLOADS

SEQUENZA 10 Flying Frame
Technical drawing
Technical drawing
Technical drawing
K&F Rotation Clamp 450 with 50 mm Bracket
Manual
Technical drawing
Technical drawing
Technical drawing
K&F Rotation Clamp 450 with 60 mm Bracket
Manual
Technical drawing
Technical drawing
Technical drawing